SC20 Degreaser / Carburetor Cleaner
This cleaning solution is an alkaline degreaser that can remove the heaviest grease accumulations. The powerful oil-splitting and grease separation capabilities make it ideal for cleaning heavily soiled mechanical parts such as carburetors and injectors. This cleaner works well on both ferrous and non-ferrous alloys, and was designed specifically for use with ultrasonic cleaners. Not only is it capable of dispersing large amounts of particulate and solids, but also splitting oil out of solution, thus greatly extending cleaning solution life. Special sequestering agents help prevent scale build up in machines.
Usage and Dilution Recommendations:
Dilute 4 to 10 ounces per gallon of water (approx. 5%). When cleaning brass, solution operating temperature should not exceed 130º F (55º C) to maintain optimum brightness. For heavy cleaning, solution may be used at up to 160º F (65º C).
|Physical and Chemical Properties|
|Physical State||Aqueous-based liquid|
|Solubility in Water||100%|
|pH of Concentration||12|
|pH at 1% Solution||10.4|
|Volatile by Weight||0%|
|Boiling Point||>212º F|
|Vapor Pressure and Density||As water|
Handling and Storage
This is a non-combustible alkaline liquid. Use good industrial hygiene practices such as wearing chemical safety goggles, rubber gloves, impermeable apron, and rubber boots as necessary to avoid personal contact with this product. In case of contact, flush eyes and/or skin with plenty of water for at least 15 minutes. Consult physician and remove contaminated clothing promptly. Store product in tightly closed containers between 50° and 85° F. Rotate stock. When stored as stated above, shelf life is a minimum of 2 years.
Refer to our material safety data sheet for more information.